Samsung NQ25 User Manual page 40

To undock your computer
To undock your computer with the power off
1. Turn off the computer.
2. Grab the two computer release levers on the docking station and pull them
outward.
3. Separate the computer from the docking station.
To undock your computer with the power on
1. Push the undock button on the docking station or click Start > Undock
Computer.
2. After docking release complete message is displayed on the screen, wait about 10
seconds, and separate the system.
If you push the undock button when the remaining battery charge is under
10%, the computer automatically goes into standby mode.
Always separate the computer from the docking station after pushing
the undock button on the docking station.
If you push the undock button and do not separate the computer, there will be
no sound output.
Using the Computer 27