Table of Contents
Advertisement
Q7 When I used an external display device with the SXGA+ system and
disconnected the device from the system, the original screen resolution is not
restored.
A
In general, when using an external display device with low resolution, the LCD
resolution is degraded while using the device and the original resolution is
restored automatically after disconnecting the external display device. If the
original resolution is not restored when disconnecting the external display
device, complete the following procedures.
Press <Fn>+<F4 / CRT/LCD> keys to change the display device.
Otherwise, click the Ati icon on the taskbar, and change the screen resolution to
the correct setting.
Q8 Pressing a function key in DOS mode does not display the OSD (status
display icon) on the screen.
A
The system does not support OSD display when in DOS mode.
Troubleshooting 85
Advertisement
Table of Contents
