Instruction Manual
20
Astronomical / Terrestrial
This function is not yet available in the software version 2.2!
Tracking Mode
This function is not yet available in the software version 2.2!
Telescope Mount
This function is not yet available in the software version 2.2!
Tracking Rate
Here, you are able to adjust the speed of the automatic tracking. Select the
desired option and press ENTER. The following options can be set:
Star Speed:
Sidereal speed / star speed
(standard factory setting)
Solar Speed:
Sun speed
Moon Speed:
Moon speed
Customize Speed:
This function is not yet available in the software version
2.2!
Guiding Speed:
Adjustment of the reaction speed with Auto-Guiding via
ST-4 interface (astrophotography). The setting of 1000
results in an aggressive reaction of the drive motors.
Settings with lower values result in a sluggish response.
This setting should be individually adjusted with each tel-
escope mounting to obtain the most uniform possible or
precise tracking. For this purpose, essential accessories,
e.g. ST-4 compatible Guiding cameras are available from
accessory suppliers.
Language
Select your preferred language. The following options are available: English,
German, French, Italian , Spanish
Telescope Model
This function is not yet available in the software version 2.2!
Reset
This allows you reset the telescope control to the factory settings. This is neces-
sary when, for example, all your settings should be undone or where a system
error occurs. You must then initialize the telescope control again as well as enter
all customer data once more.