Table of Contents
Advertisement
Using the PC Card Slot
You can use various hardware supporting PCMCIA and PCI Express interfaces via the
PC card slot. This computer provides 2 card slots and supports 16/32 bit, type I or II
PCMCIA cards and ExpressCard types.
You can insert a ExpressCard in the upper slot and a PCMCIA card in the lower slot.
•
•
To insert a PC card
Before using the PC card slot, remove the slot protector.
Push the eject button of the PC card slot once to pop it out. Push the button
again to eject the slot protector.
1. Insert a PC card into the PC card slot on the side of the computer.
Ensure that the PC card is inserted the correct way, as incorrect insertion will
damage the PC card slot.
Insert an ExpressCard here
Insert a PCMCIA card here
2. Windows automatically installs the necessary driver for the card. If there is no
available driver found by Windows, you have to install the driver using a disk
supplied with the card.
The PC card slot does not support a ZV card or a PCMCIA III card.
System don't support Hot pluging of Express card (IEEE 1394 Type). The
IEEE 1394 card should be plugged in before system on when you use this
card.
Example) PCMCIA Card
Eject Button
Using the Computer 27
Advertisement
Table of Contents
