Table of Contents
Advertisement
Upgrading Memory
This computer has one or more 256 MB or 512 MB memory module(s). Two memory
module sockets are provided so that you can replace memory or install an additional
memory module.
Removing the memory module
Before removing/replacing the memory module, turn the system off completely
and remove the battery. Do not replace the memory module when the system
is in Standby/Hibernate mode.
When using memory in dual channel, using memory of the same specification
(the same capacity and manufacturer) is recommended.
1. Using a screwdriver, open the memory module compartment cover on the bottom
of the computer.
2. Push the memory module tabs outward to pop the memory module upwards.
Carefully pull the module out at an angle of about 30
102 Users Manual
screw
°
.
Advertisement
Table of Contents
