Table of Contents
Advertisement
Intel(R) PRO/Wireless 2200BG Network
Connection
Item
Physical
Dimensions
Specifications
operation temperature
and humidity
Power Saving Mode
Power
Receiving Mode
Specification
Transmission Mode
Power
Compatibility
Operating System
Network
Specifications
Media Access Protocol
Security
* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi
Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless network
consisting of the WPA and CCX certificates, Windows patch (KB826942) or PROSet may be
required depending on the network settings. For information on the PROSet installation, refer
to P.4-15 'Wireless Network Setup Using the Wireless LAN Setup Program'. For more infor-
mation, ask your network administrator.
■
RF Specifications
R-F Frequency Band
Support Channels
Device Description
Power
Transmission Method
Data Rate (Mbps)*
Antenna Type
* The data rate may differ from the actual data rate.
** 11g mode is supported only when the device is connected with an IEEE802.11g device (e.g.
IEEE802.11g compatible Access Point).
59.75 X 44.45 mm (Width X Height)
Same as system operation specifications
Temperature: 0 ~ 70°C, Humidity: less than 85%
135mW
0.85W
1.45W
3.3V
IEEE 802.11g, IEEE 802.11b
Microsoft Windows XP, 2000
- NDIS5 Miniport Driver
CSMA/CA (Collision Avoidance) with
Acknowledgement (ACK)
Wired Equivalent Privacy support (WEP) 64bit/128bit
WPA*, CCX*
2.4GHz (ISM band)
1~13 channel
Transceiver
5 mW
11b mode: DSSS
11g mode: OFDM
11b mode: 11, 5.5, 2, and 1
11g mode** : 54, 48, 36, 24, 18, 12, 9, and 6
Internal Antenna 2 EA (main/aux)
Specifications
Appendix
A-5
Advertisement
Table of Contents
