Table of Contents
Advertisement
Display Related
Q1The LCD screen is blank.
A Adjust the LCD screen brightness. Use the <Fn> + <
Q2 The screen saver disturbs screen viewing during Media Player or
A Under the Media Player Options, in Player > Enable Screen Saver During Use,
Q3 In DOS mode, changing the full screen DOS mode by pressing
A The DOS mode which supports 2 Byte characters such as Korean and Japanese
Q4 The screen blinks, displays noise for a short time, or the screen
A This may happen in the following cases (resolution change, display device
Q5 Extended Desktop is not configured on [Display Properties]
A Change the setting to extended desktop on [Graphics Controller Properties]
Q6 I pressed <Fn>+<
A This problem may occur when you pressed <Fn>+<
7-10
Manual
video file operation.
uncheck the box and restart the player.
<ALT>+<Enter> key displays a broken image for a short period.
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
resolution is changed.
change, removal of AC adapter, system restart, and the implementation or termi-
nation of stand-by mode or maximum power saving mode)
This happens while the system is detecting display devices connected to the
system. During the detection operation, the connected display devices may blink
or some noise may occur. If you continually view an afterimage on the screen,
right-click on the Desktop and select Refresh or restart the system.
dialog. (Start > Control Panel > Appearance and Themes >
Display > Settings tab)
dialog. ((P. 6-8) Refer to 'Using External Display Devices'.)
> keys, then the screen blinks.
devices while there is no external display device connected.
Connect an external display device first, then convert display devices.
>, <Fn> + <
> keys.
> keys to convert display
Advertisement
Table of Contents
