Table of Contents
Advertisement
A3 If the AP is configured to 'Use network authentication (Shared Key)'
Q12 Although I have turned the wireless LAN off using the Off
A This is normal. The Off Button for the Wireless LAN on the PROSet only turns off
Q13 After installing the PROSet, I cannot manage the wireless net-
A Click on "Use Microsoft Client" in the Tools menu of the PROSet program to
7-20
Manual
If the AP is configured to authentication shared mode, all computers to be con-
nected should be configured as follows:
If you are using Windows XP, select network authentication(shared mode) in the
wireless network settings.
Click Start > Control Panel > Network and Internet Connections >
Network Connections. Right-click the Wireless Network Connection icon,
and click View Available Wireless Networks > Advanced. In the
Wireless Networks tab, select an AP in the Available Networks field and click
Configure and select Network Authentication (Shared Mode).
If you are using Windows 2000, check that the network authentication mode is
configured to Share in the security settings of the wireless LAN program
(PROSet).
For more network authentication procedures, ask your AP (Access Point)
administrator.
Button on the PROSet, the wireless LAN operating light is still
on.
the S/W and not the H/W for the Wireless LAN.
work under Windows.
manage a wireless network in Windows. To manage a wireless network in the
PROSet program, click on "Use Inter PROSet/Wireless" in the Tools menu of the
PROSet program.
Advertisement
Table of Contents
