Zareba SP3 User Manual page 3

 WARNING: Check local zoning laws for electric
fencing guidelines in your area . Also check with local
utilities before digging to identify any buried cables or
natural gas lines .
Tools Required
• Wire cutter/stripper (part no. FWC-1)
• Flathead, phillips and #15 torx screwdrivers
• Adjustable wrench
• Voltage tester (part no. DEFT-1 or RSVT8)
Other Required Components
• Two lengths of 20 KV insulated hook-up wire (one long
enough to connect fence controller to ground system
and one long enough to connect fence controller to
fence line)
• Fence line connector (part no. 07110-96 for steel or
poly wire; PRS2 for poly rope; or PTCC1 for poly tape)
• 6- to 8-foot ground rod(s) (part no. GR8 or 07104-96)
• Ground rod clamps–one per ground rod (part no.
CGR1 or 07105-96)
- 3 -