Table of Contents
Advertisement
A2 If your head set is a stereo headset, you have
to check if the headset is connected as a stereo
headset.
To resolve the problem, complete the procedures
below.
Double-click the Bluetooth icon on the Taskbar,
select the Audio tab and check the connection
status of the Bluetooth Stereo Audio that
corresponds to the corresponding headset in the
connected device list. If it is not connected, right-
click over the device and select Connect from
the pop-up menu.
Right-click over the Speaker icon on the
Taskbar, click Play Device > Bluetooth High-
quality Audio > Load Defaults, and click the
OK button.
After changing the Bluetooth or sound settings, you
must exit and re-run the audio/video player program
(such as Windows Media Player) to apply the
Note
changed settings.
Other
Q
A 4GB memory capacity is not recognized by
Windows.
A Windows Vista cannot display more than 4GB
of memory due to license problems and driver
compatibility reasons.
Although the memory capacity is displayed as
3GB in the system information, the 4GB memory is
recognized and can be used normally.
Q
The User Controls window appears when
installing or running a program in Windows
Vista.
A In this case, click Allow (or OK) to install or run
the program. However, if you do not have an
administrator account, you have to enter the
administrator password in the User Controls window
and then click Allow (or OK). If no administrator
password is set you can click Allow (or OK) without
entering a password.
171
Hide quick links:
Advertisement
Chapters
Table of Contents
