Table of Contents
Advertisement
Q8 After connecting to a TV, some programs such as Debug, Mem, etc. do not
run in full screen MS-DOS mode.
A
If a TV is used as the display device, some programs such as Debug, Mem, etc.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
Q9 Switching to full screen by pressing the <Alt>+<Enter> keys while playing a
music file using Media Player temporarily stops the sound.
A
Zooming in or out of the Media Player screen changes the screen resolution. The
sound may stop while the screen resolution is switched. Zoom in or out of the
Media Player screen before playing an MP3 or MPEG file.
Q10 The Taskbar on the bottom of the screen does not appear when a projector
is used as the display device.
A
This may happen, because while WXGA+ and WSXGA+ LCD support
1440x900 and 1680x1050 modes respectively, the projector does not support
these modes. In this case change the resolution to 1024x768 (recommended) on
your computer.
Q11 Switching the MS-DOS command prompt to full screen mode or Windows
mode by pressing the <Alt>+<Enter> keys does not operate properly.
A
Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key
input to be recognized as multiple key inputs depending on the keyboard input
recognition time. In this case, the MS-DOS command prompt is repeatedly
switched to full screen and then to Windows several times. Please press the
<Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the
system keyboard.
Q12 When a TV is connected, the Turn off monitor power option is not
performed.
A
When connecting a TV after booting up your computer, the Turn off monitor
power option may not be performed. For it to operate properly, it is recommended
to connect a TV and then booting up the computer.
126 Users Manual
Advertisement
Table of Contents
