Table of Contents
Advertisement
Q3 In DOS mode, changing the full screen DOS mode by pressing
<ALT>+<Enter> key displays a broken image for a short period.
A
The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 In the following cases, the screen blinks or displays noise for a short time:
(Click the Graphics Related tab, Change Resolution, Change Display
Device, Remove the AC Adapter, Restart the System, Change PowerMizer
level.)
A
This may happen while the video driver is examining the connected device.
While detecting, any connected display devices may blink or some noise may
occur.
Q5 When I connect a projector, and change the setting to display screen image
on both the LCD and the projector by pressing <Fn>+<F4 /
screen is not displayed properly.
A
Press <Fn>+<F4 /
Q6 The desktop momentarily appears as a broken image when zooming in or
out of the Media Player screen when Media Player is running.
A
Since zooming in or out of the Media Player screen changes the screen resolution,
the desktop may momentarily appear as a 'broken image' during this operation.
Q7 The playback screen of a DVD title or an MPEG file is only displayed on the
LCD.
A
Video is displayed on a single display device by default, when LCD and CRT are
selected simultaneously.
1.
Right-click over the Desktop and select Properties from the pop-up menu.
2.
In the [Display Properties] window, select the Settings tab > Advanced >
GeForce Go 6600 tab.
3.
Select the Full Screen Video menu> Full Screen Video Control item, set the Full
Screen Device to 'Auxiliary Display' and then click the Apply button. Then you
can view video on both the LCD and CRT display devices.
> keys once again.
> keys,
Troubleshooting 125
Advertisement
Table of Contents
