Setting The System - Samsung YP-F2QB User Manual

Settings

Setting the System

<Delete File> : Search and delete files in the Navigation screen. √ Page 53
I
<Resume> : Specifies the starting point to restart playback after the music you are listening to
I
is stopped. If set to <Off>, the last file listened to will play from the beginning. If set to <On>,
the last file listened to will play from the point where last played.
<Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
I
<Default Vol> : The default volume can be set 00 to 30(Max). If the power is turned on again
I
after adjusting the volume above the default volume, music is played at default volume.
If the power is turned on again after the volume was set within the default volume, the music is
played at the previously played volume.
<Default Set> : Returns all settings to the default value. √ Page 53
I
<About> : Checks the firmware version, number of stored files, remaining memory.
I
Regarding the Built-In Memory
I
NOTE The actual built-in memory available is slightly less than indicated as the internal firmware uses a portion
of the memory.
52
You can set the Default Volume, Resume and Beep
Sound functions.
1
Press and hold the [ USER/
move to the menu screen.
2
Press the [ + , - ] button to select <Settings>
and then press the [ USER/
The Settings menu appears.
I
3
Press the [ + , - ] button to select the <System>
and then press the [ USER/
The Sytem menu appears.
I
4
Use the [ + , - ] and [ USER/
set necessary functions.
MENU] button to
MENU] button.
MENU] button.
MENU] buttons to