Setting Language; Setting The System - Samsung YP-U2 Service Manual

Settings

Setting Language

Set the language for the menu and track information (ID3-Tag).
1
Press and hold the [
menu screen.
2
Press the [ + , - ] button to select <Settings> and
then press the [
The Settings menu appears.
3
Press the [ + , - ] button to select the
<Language> and then press the [
The Language menu appears.
4
Use the [ + , - ] and [
functions.
<Menu> : Set the menu language. Select from <Chinese(S)> <Chinese(T)> <Dutch> <English>
<French> <German> <Hungarian> <Italian> <Japanese> <Korean> <Polish> <Portuguese>
<Russian> <Spanish> and <Swedish>.
<ID3-Tag> : Set the track information language.Select from <Afrikaans> <Basque> <Catalan>
<Chinese(S)> <Chinese(T)> <Czech> <Danish> <Dutch> <English> <Estonian> <Finnish>
<French> <German> <Greek> <Hrvatski> <Hungarian> <Icelandic> <Italian> <Japanese>
<Korean> <Norwegian> <Polish> <Portuguese> <Romany> <Russian> <Slovak> <Slovene>
<Spanish> <Swedish> <Thai> <Turkish> and <Vietnamese>.
The supported languages can be changed or added.
What is ID3-Tag?
NOTE
This is what is attached to an MP3 to carry information relevant to the file, such as the title, artist, album, year,
genre and a comment field.
Settings

Setting the System

You can set the Default Volume, Resume and Beep Sound
functions.
1
Press and hold the [
menu screen.
2
Press the [ + , - ] button to select <Settings> and
then press the [
The Settings menu appears.
3
Press the [ + , - ] button to select the <System>
and then press the [
The Sytem menu appears.
4
Use the [ + , - ] and [
functions.
<Bit Rate> : Selects the recording quality. Select either <32kbps> <64kbps> or <128kbps>
(the higher the number is, the larger the file size becomes).
<Delete> : Search and delete files in the Navigation screen. √Page 56
<Resume> : Specifies the starting point to restart playback after the music you are listening to is
stopped. If set to <Off>, the last file listened to will play from the beginning. If set to <On>, the last
file listened to will play from the point where last played.
<Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
<Default Vol> : The default volume can be set 00 to 30(Max). If the power is turned on again after
adjusting the volume above the default volume, music is played at default volume.
If the power is turned on again after the volume was set within the default volume, the music is
played at the previously played volume.
<Default Set> : Returns all settings to the default value. √Page 56
<About> : Checks the firmware version, number of stored files, remaining memory.
» ..."
] button to move to the
] button.
] button.
] buttons to set necessary
] button to move to the
] button.
] button.
] buttons to set necessary
Regarding the Built-In Memory
NOTE The actual built-in memory available is slightly less than indicated as the internal firmware uses a por
of the memory.
To Delete a File
1
Press the [ lœœ ] button to move to the upper folder.
2
Press the [ + , - ] button to select a folder of your choi
3
Use the [√ √l] button to move to the file list of
selected folder.
Use the [√ √l] button to move to the lower level, the [ lœœ ]
button to the upper level.
4
Press the [ + , - ] button to select a file to delete and
then press the [
5
Press the [ + , - ] button to select <OK> and then
press the [
The selected file will be deleted.
Files cannot be restored after they are deleted. Please check
before deleting files.
CAUTION
Default Settings
Press the [ + , - ] button to select either <Yes> or <No> and
then press the [
<Yes> : Initializes all settings to default.
<No> : Cancels default settings.
] button.
] button.
] button.
3-5