Silvercrest SHGD 40 B1 Operating Instructions Manual page 22

Technical data
Mains voltage
Nominal power
Protection class
Appliance description
1 Display
2 Temperature button
3 On/Off button
4 Locking device
5 Suspension loop
6 Hotplates
Before straightening
■ The hair should be clean, dry and free of styling products. Excepted are the
special products that support a straightening of the hair.
■ Comb the hair thoroughly before straightening so that there are no knots in it.
Operation
Preparation
NOTICE
The hotplates 6 must be free from contamination of all kinds. If necessary,
►
clean them before taking them into use (see chapter "Cleaning").
The appliance is locked, the locking device 4 is pressed in on the side
1) Insert the plug into a mains power socket.
2) Press and hold the On/Off button 3 until the display 1 is illuminated. The
display 1 shows the programmed temperature. The colour of the display 1
indicates whether the temperature has already been reached:
–
–
SHGD 40 B1
red: the temperature has not yet been reached.
blue: the programmed temperature has been reached.
220 - 240 V ~ , 50 Hz
40 W
II
GB
MT
.
19