Panasonic Lumix S5 Operating Instructions Manual page 87

5
Start recording.
≥Press the shutter button fully.
With the default settings, [Shutter Delay] is activated, so there will be a gap in
0
time from when the shutter button is pressed until the shutter is released.
The screen goes dark during recording.
0
The recording state indication (red) blinks.
0
Do not move the camera while it is blinking.
You can continue recording when the merging process ends.
0
6
End [High Resolution Mode].
≥Press [Q].
0 In [High Resolution Mode], recording will be performed using the following
settings:
– [Shutter Type]: [ELEC.] (When [Long Exposure NR] is set to [OFF])/
[ELEC.+NR] (When [Long Exposure NR] is set to [ON])
– Minimum aperture value: F16
– Shutter speed: 8 seconds to 1/8000 of a second
– ISO sensitivity: Upper limit to [3200]
– Focus mode: [AFS]/[MF]
8. White Balance/Image Quality
DVQX2068 (ENG)
87