15. Wi-Fi/Bluetooth
1
On the smartphone, start up
"LUMIX Sync".
≥A message regarding device
(camera) registration is displayed.
Select [Next].
If you have closed the message, select
0
[
], then register the camera using
[Camera registration (pairing)].
2
Check the content in the
displayed guide and select
[Next] until the screen to
register the camera is displayed.
Operating the camera in accordance with the smartphone guide.
3
Set the camera to Bluetooth
pairing standby state.
[
≥
[Bluetooth]
≥The camera enters pairing standby
state and the device name A is
displayed.
4
On the smartphone, select the
camera's device name.
(iOS devices) When a message to
0
confirm the change of destination is
displayed, select [Join].
158
DVQX2068 (ENG)
]
[
]
[Bluetooth]
[SET]
[Pairing]
LUMIX Sync
XXXXXXXXXXXX