Auto Adjustment - Samsung SyncMaster 520DXn User Manual

Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in PC mode only)
MENU →
Coarse
MENU →
→ [Coarse] → ,
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Fine
MENU →
→ [Fine] → ,
→
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
H-Position
MENU →
→ ENTER→ [H-Position] → ,
Adjusts the screen location horizontally.
V-Position
MENU →
→ ENTER → [V-Position] → ,
Adjusts the screen location vertically.

Auto Adjustment

MENU →
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
Adjusting the LCD Display
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ ENTER
→ ENTER → [Picture] →
→ ENTER
→ ENTER → [Picture] →
→ ENTER
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ → → ENTER → [Image Lock]
→
→ → → ENTER → [Image Lock] → ENTER
→
→ → → ENTER → [Image Lock] → ENTER
→
→ → → ENTER → [Image Lock] → →
→
→ → → ENTER → [Image Lock] → → →
→
→ ENTER
→ → → ENTER → [Auto Adjustment ]
→ →