Connecting Using A Hdmi Cable; Connecting Using A Dvi To Hdmi Cable - Samsung SyncMaster 460DR User Manual

Hide thumbs Also See for SyncMaster 460DR:

Table of Contents

Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the

[VIDEO IN] on the LCD Display .

Select AV for the Camcorder connection using the SOURCE button on the front of the

LCD Display or on the remote control.

Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check

your local electronics store.) If your camcorder is stereo, you need to connect a set of two

cables.

Connecting Using a HDMI Cable

Note

•

Input devices such as digital DVD are connected to the [HDMI IN] terminal of the LCD

Display using the HDMI cable.

Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of

the LCD Display using a DVI to HDMI cable.

Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored

audio output terminals of the digital output device, and connect the opposite jack to the

[DVI/PC/HDMI AUDIO IN] terminal of the LCD Display.

Connections

Table of Contents

Syncmaster 460drn