Samsung SyncMaster 460DR User Manual page 13

Rear
Note
See the "Connections" section for details about cable connections. The LCD Display's con-
figuration at the back may vary slightly depending on the model.
Introduction
POWER S/W ON [ │ ] / OFF [O]
Switches the LCD Display On/Off.
POWER IN
The power cord plugs into the LCD Display
and the wall plug.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
DVI/PC/HDMI AUDIO IN (PC/DVI/HDMI
Audio Connection Terminal (Input))
Connect the [DVI/PC/HDMI AUDIO IN] ter-
minal of the monitor and the speaker output
terminal of your computer's sound card using
a stereo cable (sold separately).
HDMI IN
Connect the [HDMI IN] terminal at the back
of your LCD Display to the HDMI terminal of
your digital output device using a HDMI ca-
ble.
RGB IN (PC Video Connection Terminal)
Connect the [RGB IN] port on the monitor to
the RGB port on the PC using the D-SUB ca-
ble.
DVI IN (PC Video Connection Terminal)