Note
When there are two or more BMP images, they are displayed on the screen using a
slideshow.
•
It is recommended that the playback interval between two BMP images in the slide-
show should be one second. The image extraction probability will decrease with other
playback intervals.
•
A BMP image might not be extracted if it is covered by another image (for example,
the mouse pointer).
3.
If a more recent version than the current software version is detected, you will be asked
whether to upgrade the current software. If you select <Yes>, the upgrade is performed.
4.
When the software upgrade is completed, the product is turned off and on automatically.
Note
•
This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The
input resolution must be identical to the panel resolution.)
•
In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only
supported if the Edit Name is set to PC or DVI PC.
•
This is only supported if the Size is set to 16:9.
Setup Reset
Reset all the values for a setting.
Reset All
Adjusting the LCD Display