•
<Session Type>
<Session Type>
The
allows the administrator to configure the Portal for a PCoIP session or RDP session.
•
<Identify Peer By>
The <Identify Peer By> selector allows the administrator to choose whether the peer device is identified by IP and MAC
address or by Fully Qualified Domain Name (FQDN).
Table 2-2 shows the peer identity parameters available when either method is chosen. If an invalid IP address or DNS
name is entered, the OSD will prompt the administrator to correct it.
Table 2-2: Peer Identity Methods
PEER IDENTITY METHOD
Peer IP/MAC
Peer FQDN
•
<Enable Auto-Reconnect>
The <Enable Auto-Reconnect> ption allows the Portal to automatically reconnect with the last connected Host when a
session is lost.
<RDP>
The <RDP> tab allows the administrator to configure settings specific to the Remote Desktop Protocol (<RDP>).
The RDP parameters can also be configured using the Webpage Administration Interface.
Figure
2-9
: <RDP> Configuration
4-1
DATA FIELDS
Peer IP Address
Peer MAC Address
Peer FQDN
COMMENT
PCoIP or Portal RDP client
PCoIP
PCoIP or Portal RDP client
Installing the Software