Samsung SyncMaster NC190 User Manual page 43

• <Enable Diagnostic Log>
The <Enable Diagnostic Log> field controls whether connection management specific debug messages are written to the
event log of the PCoIP Host and Portal devices.
<Discovery> Tab
The <Discovery> configuration tab allows the use of features that ease the discovery of Portals in a PCoIP system.
The Discovery parameters can also be configured using the Webpage Administration Interface.
Figure 2-7 : <Discovery> Configuration
• <Enable Discovery>
If the <Enable Discovery>option is enabled, the device will dynamically discover peer devices using SLP Discovery,
without requiring prior knowledge of their locations in the network. This can dramatically reduce configuration and
maintenance effort for complex systems.
SLP discovery requires routers configured to allow multicast, and therefore DNS-SRV Discovery is the
recommended discovery mechanism.
• <Enable Host Discovery>
The <Enable Host Discovery>feature allows the Portal to discover Hosts that are not in a PCoIP session.
When enabled, the Portal is able to display up to 10 available hosts in order of being discovered. It is expected that the
<Enable Host Discovery> feature will be used with small numbers of Hosts.
<Session> Tab
The <Session> tab allows an administrator to configure how the device connects to peer devices.
The Session parameters can also be configured using the Webpage Administration Interface.
Figure 2-8 : <Session> Configuration
Installing the Software 4-1