GMC Cadillac CT5 2021 Manual page 42

If too much time passes between
releasing SET and pressing 1, the
memory position will not be saved
and two beeps will not sound.
Repeat Steps 3 and 4.
1 or 2 corresponds to the driver
number. See Identifying Driver
Number previously in this section.
5. Repeat Steps 1 4 for a second
driver using 1 or 2.
To save the position for
Exit Memory features, repeat Steps 1
4 using . This saves the position for
getting out of the vehicle.
Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
previously saved memory positions if
you are driver 1 or 2 identified in the
DIC welcome message.
To stop Manual Memory recall
movement, release 1, 2, or
any of the following controls:
Power seat
Memory SET
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
Manual Memory recall movement for
1, 2, or
and may complete to the saved
memory position if the vehicle is in or
out of P (Park).
Seat Entry Memory
and Seat
The vehicle identifies the number of
the current driver s remote key (1 8).
See Remote Keyless Entry (RKE) System
Operation 0 7. If the remote key is 1 or
2, and Seat Entry Memory is enabled
in vehicle personalization, the
positions saved to the same memory
button number 1 or 2 are
automatically recalled when the
vehicle is turned on.
to recall the
To turn Seat Entry Memory on or off,
see Vehicle Personalization Settings
previously in this section and Vehicle
Personalization 0 122.
The vehicle must be in P (Park) to
or press
start Seat Entry Memory. Seat Entry
Memory recall will complete if the
buttons may be initiated
SEATS AND RESTRAINTS
vehicle is shifted out of P (Park) prior
to reaching the saved memory
position.
To stop Seat Entry Memory recall
movement, turn the vehicle off or
press any of the following controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
If the saved memory seat position
does not automatically recall or recalls
to the wrong positions, the driver s
remote key number (1 or 2) may not
match the memory button number
that positions were saved to. Try
storing the position to the other
memory button or try the other
remote key.
Seat Exit Memory
Seat Exit Memory is not linked to a
remote key. The position saved to
is used for all drivers. To turn Seat
Exit Memory on or off, see "Vehicle
41