Switching Off The Alarm Function; Activating The "Zizz" Temporary; Alarm; Setting The Display Illumination - Medisana 270103 Instruction Manual

GB
2 Operation
2.8
Switching off
the alarm
function
2.9
Activating
the "Zizz"
temporary

alarm

2.10
Setting the
display
illumination
2.11
Switching and
adjusting the
brightness
16
2. If you press the Snooze button
setting time, the alarm time will be extended for 5 minutes. Each
further press of the Snooze button
tion for a further 5 minutes. You can extend the alarm time for up
to a maximum of 30 minutes.
If an alarm is activated, you can press the Off button
alarm function. The settings of the alarm function are kept for the next
day. If you do not press the Off button
the alarm time and forget to press the Off button
is turned off automatically after about 30 minutes.
Hint:
You can also use the Off button
sound functions.
If you are taking a short break or want to take a little nap, you can set
a short-time alarm.
1. Press the Zizz button
.
2. Pressing the Zizz button
minutes.
3. Every time you press the button, the time until the alarm goes off is
extended by 15 minutes.
4. The maximum alarm time that can be set for a short-time alarm is
90 minutes.
5. If you do not press the Zizz button
function is activated. In the Zizz function, the settings for the alarm
sound and brightness are preset. See "Setting the alarms" (page
13-14) for information on setting the alarms.
If you press the Dimmer button
and changes each time you press the Dimmer button
bright (green) to dim (green), bright (orange) to dim (orange) and display
illumination to off.
1. Press the Light button
shows the icon.
2. The figures in the display (0 - 20) indicate the brightness increments.
At the same time, the brightness gradually increases from 0 to the
brightness previously set.
within 30 minutes after the
extends the wake up func-
e.g. if you wake up before
to switch off the light, radio and
and the Zizz icon appears on the display
once sets an alarm to go off in 15
for 3 seconds, the set Zizz
, the display illumination switches on
to switch on the lamp
to switch off the
the alarm function
again from
, the display