Dolby Pro Logic Ii Mode; Dolby Pro Logic Ii Effect - Samsung HT-DS420 Instruction Manual

Dolby Pro Logic II Mode

You can select the desired Dolby Pro Logic II audio mode.
Press PL II MODE button.
•
Each time the button is pressed, the mode changes as follows.
Note •
When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
PRO LOGIC II
•
MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
•
CINEMA: Adds realism to the movie soundtrack.
•
PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
•
MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
61

Dolby Pro Logic II Effect

This function works only in Dolby Pro Logic MUSIC mode.
Press
1 PL II MODE
button to select 'MUSIC'
mode.
DSP TITLE PBC CHAP PRGM RDS RT TA TUNED
LINEAR PCM ST
L C R
SW CMX kHz
MHz
LS RS MPEG-2 AAC MPEG
Press PL II EFFECT button
3
and then press Cursor ,
buttons to select the mode.
•
You can select between 0 and 7.
DSP TITLE PBC CHAP PRGM RDS RT TA ST TUNED
LINEAR PCM
L C R
CMX
SW kHz
MHz
LS RS MPEG-2 AAC MPEG
Note •
When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and (Dolby Pro Logic II) button does not work.
•
PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
•
CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
•
DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
Press PL II EFFECT button
2
and then press Cursor ,
buttons to select the mode.
•
You can select either 0 or 1.
DSP TITLE PBC CHAP PRGM RDS RT TA TUNED
LINEAR PCM ST
L C R
SW CMX kHz
MHz
LS RS MPEG-2 AAC MPEG
Press PL II EFFECT button
4
and then press Cursor ,
buttons to select the mode.
•
You can select between 0 and 6.
DSP TITLE PBC CHAP PRGM RDS RT TA ST TUNED
LINEAR PCM
L C R
CMX
SW kHz
MHz
LS RS MPEG-2 AAC MPEG
62