Sony SSE-TN1W Reference Manual

Getting Started
Scan the code to
Smart
access the "Start
Tennis Sensor
Guide" and "Help
Guide" online.
Reference Guide
Guide de référence
http://www.smarttennissensor.sony.net/info/
SSE-TN1W
What Start Guide explains
• Charging the sensor
• Attaching the sensor to a racket
4-534-240-12(1)
• Downloading the app
Customise the app
• Initial settings
• Registering your profile and racket
type, etc.
DONE!
Enjoy a new tennis experience!
For details and FAQ about how to use the
sensor, please refer to the "Help Guide" online.
English
Package contents
What's included in the box
Sensor Attachment (2)
(SSE-TN1)
Cradle cap Micro-USB cable
Carrying pouch Set of printed documents
Owner's Record
The model and serial numbers are located on the bottom of the sensor. Record the
serial number in the space provided below. Refer to these numbers whenever you
call your Sony dealer regarding this product.
Model No. SSE-TN1
Serial No.
The following FCC statement applies only to the version of this model
manufactured for sale in the USA. Other versions may not comply with FCC
technical regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that are deemed to
comply without testing of specific absorption rate (SAR).
CAN ICES-3 B / NMB-3 B
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that are deemed to
comply without testing of specific absorption rate (SAR).
USA and Canada only
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning
your used rechargeable batteries to the collection and
recycling location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-822-8837, or
visit http://www.call2recycle.org
Caution: Do not handle damaged or leaking Lithium-Ion
batteries.
©2014 Sony Corporation
Printed in Japan
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
This product has been manufactured by or on behalf of Sony Corporation, 1-7-1
Konan Minato-ku Tokyo, 108-0075 Japan. Inquiries related to product compliance
based on European Union legislation shall be addressed to the authorized
representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters, please refer to the addresses
provided in the separate service or guarantee documents.
Hereby, Sony Corp., declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
For details, please access the following URL :
http://www.compliance.sony.de/
This equipment has been tested and found to comply with the limits set out in the
EMC regulation using a connection cable shorter than 3 meters.
Europe Only
Disposal of waste batteries and electrical and electronic
equipment (applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product, the battery or on the packaging indicates
that the product and the battery shall not be treated as household
waste. On certain batteries this symbol might be used in combination
with a chemical symbol. The chemical symbols for mercury (Hg) or
lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004%
lead. By ensuring these products and batteries are disposed of correctly, you will
help prevent potentially negative consequences for the environment and human
health which could otherwise be caused by inappropriate waste handling. The
recycling of the materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be
replaced by qualified service staff only. To ensure that the battery and the electrical
and electronic equipment will be treated properly, hand over these products at
end-of-life to the applicable collection point for the recycling of electrical and
electronic equipment. For all other batteries, please view the section on how to
remove the battery from the product safely. Hand the battery over to the applicable
collection point for the recycling of waste batteries. For more detailed information
about recycling of this product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where you purchased the
product or battery.
What is BLUETOOTH® wireless
technology?
BLUETOOTH wireless technology is a short-range wireless technology that enables
wireless data communication between digital devices.
Cradle
Connecting two devices is common, but some devices can be connected to
multiple devices at the same time.
You do not need to use a cable for connection, nor is it necessary for the devices to
face one another. For example, a device can communicate via BLUETOOTH even
when it is in a bag or pocket.
Removal tool
Maximum communication range
BLUETOOTH wireless technology operates within a range of about 10 m (about
33 ft). Maximum communication range may shorten under the following conditions.
– There is an obstacle such as a person, metal, or wall between the devices that
are communicating.
– A wireless LAN device is in use near the system.
– A microwave oven is in use near the system.
– A device that generates electromagnetic radiation is in use near the system.
Interference from other devices
Because BLUETOOTH devices and wireless LAN (IEEE802.11b/g/n) use the same
frequency, microwave interference may occur and result in communication speed
deterioration, noise, or invalid connection if the system is used near a wireless LAN
device. In such a case, perform the following.
– Use the system at least 10 m (about 33 ft) away from the wireless LAN device.
– If the system is used within 10 m (about 33 ft) of a wireless LAN device, turn
off the wireless LAN device.
Interference to other devices
Microwaves emitting from a BLUETOOTH device may affect the operation of
electronic medical devices. Turn off the system and other BLUETOOTH devices in
the following locations, as it may cause an accident.
– where inflammable gas is present, in a hospital, train, airplane, or gas station
– near automatic doors or fire alarms
Notes
• To be able to use the BLUETOOTH function, the BLUETOOTH device to be
connected requires the same profile as the system's.
Note also that even if the same profile exists, devices may vary in function
depending on their specifications.
• This system supports security capabilities that comply with the BLUETOOTH
standard to provide a secure connection when the BLUETOOTH wireless
technology is used, but security may not be enough depending on the setting. Be
careful when communicating using BLUETOOTH wireless technology.
• We do not take any responsibility for the leakage of information during
BLUETOOTH communication.
• A device featuring the BLUETOOTH function is required to conform to the
BLUETOOTH standard specified by Bluetooth SIG, and be authenticated. Even if
the connected device conforms to the above mentioned BLUETOOTH standard,
some devices may not be connected or work correctly, depending on the features
or specifications of the device.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.
Other trademarks and trade names are those of their respective owners.
Precautions
Failure to follow the safety precautions below may cause serious injury or a fire.
This Reference Guide includes important information to avoid accidents. Keep this
Reference Guide in a location where you can access it whenever you need it. Read
carefully throughout this Reference Guide, Start Guide (on the web) and Help
Guide (operation manual on the web), then use the sensor safely.
For your safety
Follow the instructions below to prevent any accidents.
• Observe "Precautions".
Read the WARNING and CAUTION sections below carefully.
• Conduct a periodic inspection.
Check the sensor at least once a year for any malfunction.
• Stop using when there is a malfunction.
Stop using the sensor immediately and contact the nearest Sony dealer or
customer center when you notice that there is a malfunction such as the sensor
making a strange sound or there is smell/smoke coming out from the sensor.
WARNING
• Be sure to use the supplied cradle and micro-USB cable only.
• Do not incinerate or dispose of the sensor and included items in fire.
• Do not disassemble the sensor.
• Keep the sensor and included items out of the reach of children.
• Do not leave, store, or charge the sensor in a place where it is exposed to high
temperatures such as inside a car in direct sunlight or near a fire source.
• Do not charge the sensor when the sensor and cradle are wet.
• Do not let water or a foreign object enter the sensor and cradle.
• Do not poke the sensor and cradle with sharp objects.
CAUTION
• Do not sit down with the sensor in the back pocket of your pants.
• Do not fling the sensor.
• Do not hit the ground, net, etc. with your racket when the sensor is installed.
• Do not swallow or put the sensor and included items in your mouth.
Note on the lithium-ion battery
• Do not handle damaged or leaking lithium-ion batteries.
Notes on use
• Do not crush or expose the sensor to extreme shock such as hammering or
dropping, since this is a precision device.
• Be sure to use the appropriate attachment for your racket model.
• When using the sensor internationally, it is your responsibility to ensure that the
sensor is used in compliance with the following specifications:
– Wireless products regulation
– Other safety regulations or requirements
• Do not leave the sensor in a place where it is dusty, humid, oily, smoky, steamy or
in high temperatures, such as inside a car in direct sunlight. Such conditions may
damage the sensor and cause it to malfunction.
• Do not clean the sensor with water.
• Charge the battery every six months even if you do not intend to use the sensor
for a long period of time.
Customer service
For Customers in the USA and Canada
If you have any questions about this product, please go to:
for USA: www.sony.com/US/SmartTennisSensor
for Canada: www.sony.com/CA/SmartTennisSensor
Specifications
Wireless communication standard
BLUETOOTH Ver. 3.0
Transmission output
Class 2 (2.5 mW)
Maximum communication range
10 m (33 feet) or more
Radio frequency
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Water and dust resistant
IP65 equivalent
Operating temperature
-5 °C – 50 °C (23 °F – 122 °F)
Charging temperature
0 °C – 40 °C (32 °F – 104 °F)
Dimensions
Φ 31.3 mm (1 / inch), Height 17.6 mm ( / inch)
1 23
4 32
Mass
Approx. 8 g (0.28 oz)
Design and specifications are subject to change without notice.