Table of Contents
Advertisement
31P~68P(DB1350)-GB
2/16/04 5:49 PM
Listening to Radio
You can listen to the chosen band (FM, MW, LW broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER/
BAND button.
•
The selection toggles back
and forth between "FM
LW" each time the
TUNER(BAND) button is
pressed.
Main Unit
Press the Function
1
button to select the
desired band (FM,
MW, LW).
55
Page 60
2
Tune in to the
desired station.
Automatic Tuning 1
When
preset broadcast station is
MW
selected.
Press and hold
Automatic Tuning 2
automatically search for
active broadcasting stations.
Manual Tuning
Briefly press
increase or decrease the
frequency incrementally.
2
Select a broadcast
station.
Press the STOP ( )
Automatic Tuning 1
button to select
PRESET and then press
button to select the preset station.
Press the STOP ( ) button
Automatic Tuning 2
to select "MANUAL" and
then press and hold
automatically search the band.
Press STOP ( ) to select
Manual Tuning
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
is pressed, a
to
to
button to
Advertisement
Table of Contents
