Advertisement
5
Mounting and set-up
Mount
transmitter and
magnet
System test
wicket door:
opening and
closing
6
Maintenance
6.1
Warning indicator for low battery voltage
Receiver: 3 beeps every minute
3x
Beep
Battery voltage low
6.2
Battery change
Open housing
Remove batteries (don't touch the reed switches)
Insert new batteries (take polarity into account)
Put on the cover
7
Alternative installation with double sided tape
View of transmitter
(bottom)
8
Technical data
Transmitter
Battery power
Power consumption
Protection class IEC 60529
9
EU Declaration of Conformity
See attachment
10
WEEE
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal, processing and recycling of electrical and electronic equipment.
11
Contact
BBC Bircher Smart Access, BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
Designed in Switzerland / Made in EU
2
Note: Distance
between magnet /
transmitter when
doors are closed
OK?
OK?
Double-sided
adhesive tape
2x Lithium 3 V type CR2032
Transmitting: 17 mA standby: 16 µA
IP65
< 5 mm
To find out which transmitter has low
battery voltage:
Press each edge and open / close
OK?
the wicket door.
A beep indicates the low battery.
OK?
Caution!
Ensure surfaces are clean, dry and free of dust and grease.
System
Frequency bands
868.15 MHz & 869.525 MHz
Range
Under optimum conditions up to 100 m
Pollution degree
2
Working temperature
–20 °C to +55 °C
Wicket
correctly
door
positioned
Advertisement
