Connecting External Component; Connecting The Fm Antenna - Samsung HT-BP10 Instruction Manual

Connecting External Component

Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
1
Connect Audio In on the Home Theater to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX input.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD AUX
15
FM DAB.
Connecting the FM, DAB Antennas
FM antenna connection
1. Connect the FM antenna supplied to the
FM 75Ω COAXIAL terminal.
2. Slowly move the antenna wire around
until you find a location where reception
is good, then fasten it to a wall or other
rigid surface.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
FM Antenna (supplied)
DAB Antenna
Connecting the DAB Antenna (Included)
1. Connect the connector on the end of the
DAB antenna cable into the DAB antenna
input on the back of the unit.
2. Attach the end of the DAB antenna cable
to a wall with good reception.
16
GB