Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
Audio Cable
If the external
analog component
has only one Audio
Out, connect either
left or right.
1
Connect Video Out on the DVD player to Video
In on the TV.
2
Connect Video In on the DVD player to Video
Out on the external analog component.
3
Connect Audio In on the DVD player to Audio Out
on the external analog component.
•
Be sure to match connector colors.
4
Press AUX on the remote control to select AUX 1
or AUX 2.
•
Each time the button is pressed, the selection changes as
follows: DIGITAL IN AUX 1 AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
AUX1
AUX2
FM
R
L
DIGITAL IN
AM.
Video Cable
VIDEO OUT
VIDEO IN
Note
•
If you have connected an external digital
component and Video In (1, 2) at the
same time, there will be video from AUX 1
even when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
20