Fig. 4 - Loewe Module RJ12/MU/IR-Link Installation Instructions Manual

3. Opening the TV set
Connect 32/40 LED
Pull out the mains plug!
Remove the connecting leads from the TV set.
Remove the short connecting cable between the tuner connections if available.
Loosen and remove the screws marked by arrows in the appropriate sketch according to the TV set model.
(Proceed in the reverse order to replace the rear panel.)
Procedure

Fig. 4

Fig. 5
a1
If possible, position the TV set so that it is accessi-
ble from all sides.
Unlatch connecting cover (arrow) to the rear and
remove.
Remove the screws indicated by the arrows on the
rear side.
Opening the screws a1 and a2 is applicable only
for the TV set Connect 40 LED.
We recommend wearing gloves when removing/
mounting the device rear panel/ housing parts.
rear panel.
Once all the screws have been removed, the
rear panel can be detached.
a2
19