LG KE500 User Manual page 198

Settings
Access Point
(Menu 9.4.2.3)
v
View: You can see the selected profile.
v
Edit: You can edit the selected profile.
v New access point
• Name: You can type the network name.
• Bearer setting: You can set the bearer data
service. Data/GPRS
<Data settings>
Appears only if you select Data Settings as a
Bearer/service.
- Dial-up number: Enter the telephone number
to dial to access your WAP gateway.
- User ID: The users identity for your dial-up
server (and NOT the WAP gateway).
- Password: The password required by your
dial-up server (and NOT the WAP gateway) to
identify you.
- Call type: Select the type of data call;
Analogue or Digital (ISDN).
80
- Call speed: The speed of your data connection;
9600 or 14400 (Depends on Operator)
- Linger time: You need to enter timeout period.
After entering that, the WAP navigation service
will be unavailable if any data is not input or
transferred.
- PrimarySecond DNS: Input the IP address of
the primary DNS server you access.
<GPRS settings>
The service settings are only available when
GPRS is chosen as a bearer service.
- APN: Input the APN of the GPRS.
- User ID: The users identify for your APN server.
- Password: The password required by your APN
server.
- Primary DNS: Input the IP address of the
primary DNS server you access.
- Second DNS: Input the IP address of the
secondary DNS server you access.