Tektronix 7B80 Instruction Manual page 6

7B80 Operators
This manual contains safety information which the user must follow to ensure safe operation of this instrument. WARNING
information is intended to protect the operator, CAUTION information is intended to protect the instrument. The following
are general safety precautions that must be observed during a l l phases of operation.
1
W A R N I N G
1
Ground the Instrument
To reduce electrical-shock hazard, the mainframe (oscilloscopel chassis must be properly grounded. Refer to the mainframe
manual for grounding information.
Do Not Operate in Explosive Atmosphere
Do not operate this instrument in an area where flammable gases or fumes are present. Such operation could cause an
explosion.
Avoid Live Circuits
Electrical-shock hazards are present in this instrument. The protective instrument covers must not be removed by operating
personnel. Component replacement and internal adjustments must be referred to qualified service personnel.
Scans by ArtekMedia O 2006