Connecting The Fm Antenna - Samsung HT-D7100 User Manual

FM ANT. VIDEO OUT
METHOD 2 : Composite Video (GOOD QUALITY)
After connect the supplied Video Adapter to the VIDEO OUT on the rear of the product, connect the
Video Adapter and the VIDEO IN of the TV with video cable.
✎
NOTE

The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup
menu. (See page 28)

After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.

If you have set the product's remote control to operate your TV, press the TV SOURCE button on
the remote control and select VIDEO as the external source of the TV.
!
CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
FM Antenna (supplied)
FM ANT. VIDEO OUT
HT-D7100_ELS_1227.indd 21 HT-D7100_ELS_1227.indd 21
LAN HDMI OUT
Video Adapter

Connecting the FM Antenna

1. Connect the FM antenna supplied to the FM
ANTENNA Jack.
2. Slowly move the antenna wire around until you fi nd a
location where reception is good, then fasten it to a
wall or other rigid surface.
✎
NOTE

This product does not receive AM broadcasts.
Video Cable
English
2011-12-27 2011-12-27
21
1:18:45 1:18:45