Connecting External Components - Samsung HT-AS610 Instruction Manual

Connecting External Components

Connecting Video Component
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
DVD Player Video Projector
• Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
• In a DVD/CD player, you can select one digital audio input from OPTICAL and COAXIAL.
12
SAT
(Settop Box)
• If using VCR, connect Analog Audio Out to VCR/SAT
Audio In on this unit. If using STB, connect Digital
Out to the SAT Optical connector on this unit.
• The Analog Audio and Video In jacks of the main unit
are used for SAT and VCR. You cannot connect both
devices at the same time.
• If there is a Digital Out for the satellite/cable STB, it
can be connected to the SAT Optical connector on
the rear panel to provide multi-channel surround. If
there is no Digital Out connector on the STB, connect
the Analog Audio Out connector to the VCR/SAT
Audio In on the unit.
• If the external component has only one Audio Output
jack, connect it to either the right or left Audio Input
jack of the main unit.
• Connect the audio cable's red plug to the red jack
and white cable to the white jack.
VCR
GB
TV
13