Bosch Nyon BUI350 Owner's Manual page 16

English – 14
Starting operation of the on-board
computer
Prior to initial start-up, remove the protective
u
film from the display to guarantee that the on-
board computer is fully functional. If the protec-
tive film remains on the display, this can impact the
functionality/performance of the on-board com-
puter.
Full functionality cannot be guaranteed for the
u
on-board computer if protective films are used
on the display.
The Nyon is supplied with a partially charged battery.
Before the first use, the Nyon battery must be fully
charged via the USB port or via the eBike system.
It is possible to set off within a short duration (ap-
prox. 4 seconds) of switching on the on-board com-
puter. During the subsequent period, the on-board
computer will continue loading the complete operat-
ing system in the background.
Note: When you switch on the on-board computer for
the first time, the on-board computer may require a
longer period of time before it is ready for travel.
If the on-board computer is connected to a Wi-Fi net-
work, the user will be informed about the existence of
a new update where applicable. Make sure to down-
load the update and install the latest version.
Creating a user ID
In order to be able to use all the functions of the oper-
ating system, you must register online.
With a user ID, you can analyze your ride data, plan
offline routes and transfer these routes to the on-
board computer.
You can set up a user ID via your Bosch eBike Con-
nect smartphone app or simply at
www.eBike-Connect.com. Enter the details required
for registration. The Bosch eBike Connect smart-
phone app is available to download free of charge
from the App Store (for Apple iPhones) or from the
Google Play store (for Android devices).
1 270 U20 BN2 | (19.05.2020)
Connecting the on-board computer to the portal
The on-board computer can be connected to the por-
tal via a Wi-Fi connection.
To do this, proceed as follows:
– Press <Login> on the <Status Screen>.
– Select <WiFi>.
– Select a network.
– Enter your username and password.
Once a connection has been successfully established,
all data is synchronized with the on-board computer.
Connecting the On-Board Computer with the
Bosch eBike Connect App
Follow these steps to establish a connection to your
smartphone:
– Load the app.
– Select the tab <My eBike>.
– Select <Add new eBike device>.
– Add Nyon (BUI350).
The app will then display an instruction to press and
hold the bike lighting button (1) on the on-board
computer for 5 seconds.
Press and hold the button (1) for at least 5 seconds.
The on-board computer automatically activates the
Bluetooth® Low Energy connection and switches to
pairing mode.
Follow the instructions on the screen. Once pairing is
complete, the user data is synchronized.
Note: The Bluetooth® connection does not need to be
activated manually.
Setting the assistance level
On the operating unit (16), you can set the level of as-
sistance you want the eBike drive to provide you with
while pedaling. The assistance level can be changed
at any time, even while cycling.
Note: In some models, the assistance level may be
preset and cannot be changed. There may also be
fewer assistance levels available than stated here.
Bosch eBike Systems