Setting The Speaker Mode - Samsung AV-R620 Instruction Manual

Setting the Speaker Mode

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether certain
speakers are used or not.
REMOTE CONTROL
1
Press SPK SELECT button to select the speaker you want.
Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SW SPK ➝
•
CROVR ➝ SPK MODE OFF will be selected in turn.
2
Press ...† button to set the mode (Large, Small etc.) for the
selected speaker.
3
Repeat steps 1-2 to set the mode for each speaker.
To Exit Setup Mode
Wait for about 5 seconds or press the SPK SELECT button of the remote control to
•
select SPK MODE OFF.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button on the remote.
• Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in
turn.
If F.SPK is set to LARGE, you can select YES or NO for SW SPK.
•
If F.SPK is set to SMALL, SW SPK is automatically set to YES. NO cannot be
•
selected.
20
√
MAIN UNIT
1
Press SETUP button.
• "SETUP MODE" appears on the display and enters into Setup Mode.
2
Press FUNCTION button 1 time.
"SPK SETUP" appears in the display.
•
3
Press SURROUND button to select the speaker you
want.
Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SW SPK ➝
•
CROVR will be selected in turn.
4
Press SELECT (
selected speaker.
5
Repeat steps 3-4 to adjust each speaker.
To Exit Setup Mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP MODE OFF" appears on the display and exits Setup Mode.
Setting the Speaker
SPEAKER Possible Settings Default Setting
F.SPK(Front) LARGE,SMALL SMALL
C.SPK(Center) LARGE,SMALL,NONE SMALL
S.SPK(Surround) LARGE,SMALL,NONE SMALL
SW SPK(Subwoofer) YES,NO YES
CROVR 60,80,100,120,
150Hz
(Crossover Frequency) 150,180,200(Hz)
, ) button to set the mode for the
• LARGE : Select when using large speakers. You can listen to full
range sound.
• SMALL : Select when using small speakers.
Bass below 100Hz will not be output.
• NONE : Select when you use no speaker.
• YES(Subwoofer) : Select when using the Subwoofer Speaker.
• NO(Subwoofer) : Select when not using the Subwoofer Speaker.
• CROVR: Select the crossover frequency for the best bass
response in your room.
21
GB