Peiying PY0015 Owner's Manual page 20

Owner's manual
gree angle.
To display correctly, press MIC button/REC button for 3 seconds
for invert display and non invert display.
Caution: Setting of display has been saved automatically after po-
wer off.
f) G-Sensor
G-Sensor, if car collided during recording, DVR displays a sign of a
lock, which 10 seconds before collided and next 20 seconds will be
saved automatically as a special video. This video will not be cove-
red during loop-recording.
Tips:
• Saved locked video will be named start with ZW, while normal vi-
deos named start with AW
• Sensitivity of G-Sensor is adjustable; default setting is "middle".
g) Video Locking by One Button
Video locking is to prevent important evidence video has been
overwritten by loop recording. To lock a video, press emergence
button while recording, current video will be saved pre 10 seconds
and next 20 seconds recording.
h) Date and Time Setting
To set date and time, shortly press twice on menu button under
standby mode. Selecting the date in setting menu with page up/
down button, shortly press emergence button to confirm and enter
into date and time setting.
Caution: For the correct time/date in evidence video, please adjust
the time and date correctly.
i) Audio On/Off by One Button
EN
To stop the audio/recording without sound, shortly press MIC but-
ton under video recording. While the microphone sign at the bot-
tom of display shows color of white, means MIC have been swit-
ched off. Press MIC button again and the microphone turned blue,
means MIC have been switched on.
Tips: MIC setting will be automatically saved, do not need to edit
again after restart the device.
20