Talking On The Phone; Wired Connection (Playthrough Function); Auto Power Off Function - Audio Technica ATH-M50xBT User Manual

Using the product

Talking on the phone

• If your Bluetooth device supports telephone features, you can use this product's built-in microphone to talk on the phone.
• When your Bluetooth device receives a phone call, the product sounds a ring tone.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music play-
back resumes.*
1
Operation
When
Press the control button.
Receiving
Press and hold the control button (for about
a call
2 seconds).
Press the control button.
Talking Press and hold the control button (for about
on a call 2 seconds).
Press a volume button (+ or -).
*1 Depending on your Bluetooth device, music playback may not resume.
*2 When you hear a confirmation tone, release the control button.
• The phone call controls explained above may not be available on some smartphoneWis.

Wired connection (playthrough function)

This product features a playthrough function that allows it to be used as a pair of traditional headphones, even if the
battery becomes depleted. To connect the product to your portable player, simply connect the connector plug of the
included cable to the product's connector jack, and connect the input plug to your portable player.
Portable player

Auto power off function

The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on.
*2
Input plug
Function
Answers the call.
Rejects the call.
Ends the call.
Each time you press and hold the button (about 2 sec-
onds), you switch the call to your mobile phone or to the
2
product.*
Adjusts the volume (+ or -) of the call.
10
Connector jack
Connector plug