Basic Tv Tuner Operations; Inserting Batteries In The Remote Control; Setting The Date And Time - Samsung SV-DVD50 Instruction Manual

DVD50-XEU(1-19) 1/27/03 6:41 PM

Basic TV Tuner Operations

The following buttons are used when watching television via the
DVD-VCR's built-in TV tuner.
1 TV/VCR Button
Press to switch between your TV's tuner and the VCR's internal
tuner.
1
2
CH Up/Down Button
Press to change to the next or previous channel.
3
0-9 Buttons
Press to select channels directly.
4 INFO.
Press to display the channel you are watching.
2
2
3
16
Page 16
Also works in DVD and VCR mode.

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when
you:
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AAA, RO3 or equivalent batteries, taking care to respect
the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Do not mix different battery types (manganese and
alkaline for example).

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:
Automatically stop programme recording
Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
You purchase the DVD-VCR
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually.
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1 After pressing the MENU, press the ENTER or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the
❷
option.
3 Press the ENTER button to select this option.
Result: The menu is displayed.
CLOCK SET
4 Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result: The option selected highlight.
5
Press the or buttons to increase or decrease the value.
❷
Result: The day of the week is displayed automatically.
You can hold the or buttons down to scroll more
❷
quickly through the values.
6
On completion, press RETURN to exit the menu.
1
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
.
.
Clock Set
Time Date Year
Clock
12 : 00 1 / JAN / 2003 WED
Auto Clock : On
.
.
17