Maintenance; Warranty Information - KLARBACH HL31537we Instruction Manual

temperature.
3. The appliance tilt or base leave the ground, power will cut off
automatically.
4. If you stop using heater, turn off all of the power switch, then put off the
plug.
5. If you want to move the heater, please turn off the switches, then put off the
plug, and hand on the handle on the back of the convector.

Maintenance:

1. Please make sure the plug should be put off before cleaning the heater.
2. Strictly prohibit to use water to wash the radiator, it can be cleaned by a piece
of soft damp cloth with a little neutral detergent. Please do not use other
solvent like gasoline.
3. The fan heater must be used or stored after cooled and dried completely.
4. If stop using heater, please put off the plug from the socket, and store it in
the dry place with a rust-proof polybag, original packing is favored.

Warranty Information

The manufacturer provides warranty in accordance with the legislation of the
customer's own country of residence, with a minimum of 1 year (Germany: 2
years), starting from the date on which the appliance is sold to the end user.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service
centre. When making a claim under the warranty, the original bill of purchase
(with purchase date) must be submitted.
The warranty will not apply in cases of:
- Normal wear and tear
- Incorrect use, e.g. overloading of the appliance, use of non-approved
accessories
13
- Use of force, damage caused by external influences
- Damage caused by non-observance of the user manual, e.g. connection to an
unsuitable mains supply or non-compliance with the installation instructions
- Partially or completely dismantled appliances
Information requirment for the electric
local space heaters
Model identifier(s):LCH-62A/HL31537we
Item Symbol Value Unit
Heat output
Nominal heat
Pnom 1.5
output
Minimum heat
Pmin 1
output (indicative)
Maximum continuous
Pmax,c 1.5
heat output
Auxiliary electricity
consumption
At nominal heat
elmax N/A
output
At minimum heat
elmin N/A
output
In standby mode
elSB 0
ENG
Item Unit
Type of heat input, for electric storage
local space heaters only (select one)
manual heat charge control,
kW
No
with integrated thermostat
manual heat charge control with
kW room and/or outdoor temperature
No
feedback
electronic heat charge control with
kW room and/or outdoor temperature
No
feedback
fan assisted heat output No
Type of heat output/room
kW
temperature control (select one)
single stage heat output and
kW
No
no room temperature control
Two or more manual stages,
kW
No
no room temperature control
with mechanic thermostat
Yes
room temperature control
with electronic room
No
temperature control
electronic room temperature
No
control plus day timer
electronic room temperature
No
control plus week timer
Other control options
(multiple selections possible)
room temperature control,
No
with presence detection
room temperature control,
No
with open window detection
with distance control option No
14