Table of Contents
Advertisement
C
onnections
C
onnections
Connecting DVD-VCR to the TV
using Audio/Video Cable
You can connect your DVD-VCR to the televi-
sion using the Audio/Video cable if the appro-
priate input is available on the television. You
thus:
•
Obtain better quality sound and pictures
•
Simplify the setting up procedure of your
DVD-VCR.
• A cable television network
• A satellite receiver
Note
•
Regardless of the type of connection chosen, you
must always connect the Audio/Video Cable sup-
plied. Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
•
Make sure that both the television and the
DVD-VCR are switched off before connecting the
cables.
1
Connect one end of the Audio/Video cable to
the Video output and Audio output jack on
the rear of the DVD-VCR.
2
Plug the other end into the appropriate con-
nector on the television.on your DVD-VCR.
Ê
¹ u
H e
² K
8 - English
* DVD-V6500
« Ã
Connecting DVD-VCR to the TV
Connecting DVD-VCR to the TV
using the S-Video Cable
using the S-Video Cable
You will enjoy high quality images. S-Video
seperates the picture element into black and
white(Y) and colour(C) signals to present
clearer images than regular video input mode.
1
Connect one end of the S-Video cable into
the S-VIDEO output jack on the rear of the
DVD-VCR.
2
Plug the other end of the S-Video cable into
the appropriate input connector on the
sion.
televi
3
Connect one end of the audio cables sup-
plied into the AUDIO LINE output jacks on
the rear of the DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4
Plug the other end of the audio cables into the
appropriate input connectors on the televisio
n.
3
1
4
2
Advertisement
Table of Contents
