Samsung DVD-VR370 User Manual page 36

system setup
Audio DRC (Dynamic Range Control) (DVDs only)
Makes the sound clearer when the volume is turned down when playing a DVD that conforms to Audio DRC.
•
Standard : Normal setting
•
TV Mode : Makes low sounds clear even if you turn the volume
down.
•
Wide Range : Gives you the feeling of being at a live
performance.
Audio (HDMI) (DVD-VR375 only)
Selets the output method from the HDMI OUT jack.
•
Auto : Normal setting. Outputs audio signals according to the
status of the connected HDMI device. If the HDMI OUT jack is
connected to equipment not compatible with Dolby Digital,
PCM will automatically be output, even when "Dolby Digital" is
selected.
•
PCM : Converts all audio signals to Linear PCM.
Scan Audio (DVDs only)
•
On : Outputs audio signals during FF1 fast-forward of a DVD
disc with Dolby Digital soundtracks.
•
Off : Turns off the function. No sound is output during FF1
fast-forward.
M

Sound will be interrupted during Scan Audio.

If the audio format is LPCM, this function is not supported.
Surround
Turns on the surround function to create virtual rear speakers from a stereo TV or two separate front
speakers.
•
Off : No surround effect
•
Surround 1 : Creates one set of virtual surround speakers.
•
Surround 2 : Creates two sets of virtual surround speakers.
•
Surround 3 : Creates three sets of virtual surround speakers.
M

When the playback signal does not contain surround audio signals,
the surround effects will not be heard.

When you select one of the surround modes, turn off the surround
settings of the connected TV or amplifi er (receiver).
36_ system setup
Audio
Title List Digital Out : On
Downmix : Dolby Surround
Timer
✔
Audio DRC : Standard Standard
TV Mode
Edit
Scan Audio : On
Wide Range
Surround : Off
Dubbing
AV Audio Input : Stereo
Disc
Setting
Setup
> Move sOk rReturn
Audio
Title List Digital Out : On
Downmix : Dolby Surround
Timer
Audio DRC : Standard
Edit
Audio(HDMI) : Auto
✔
Auto
Scan Audio : On PCM
Dubbing
Surround : Off
Disc
Setting
DV Audio Input : Stereo1
AV Audio Input : Stereo
Setup
> Move sOk rReturn
Audio
Title List Digital Out : On
Downmix : Dolby Surround
Timer
Audio DRC : Standard
Edit
Scan Audio : On
✔ On
Surround : Off Off
Dubbing
AV Audio Input : Stereo
Disc
Setting
Setup
> Move sOk rReturn
Audio
Title List Digital Out : On
Downmix : Dolby Surround
Timer
Audio DRC : Standard
Edit
Scan Audio : On
✔
Surround : Off Off
Dubbing
Surround1
AV Audio Input : Stereo
Disc
Surround2
Setting
Surround3
Setup
> Move sOk rReturn
12:00
eExit
12:00
eExit
12:00
eExit
12:00
eExit