Control Functions & Settings Menu; Brightness; Pairing; Lullaby - Alecto DVM-260+ User Manual

4.5 CONTROL FUNCTIONS & SETTINGS MENU:
Press the button
now look like this:

Brightness

Motion
Brightness:
• Select this option by using the buttons
Camera:
• Select this option by using the buttons

– Pairing:

This enables the parent-unit to search for a new camera; see paragraph 5.

– Lullaby:

This enables you to select a lullaby.
If you have more than one camera linked to the parent-unit, first select the camera you want
using the
select the chosen lullaby.You can choose from different lullabies per camera.
The lullaby will stop playing automatically after 15 minutes.

– Temperature:

Press the
want.
Use the
the temperature to a minimal and a maximum limit. If the temperature of the baby unit crosses
the selected limits it will display red (too hot) or blue (too cold) and give a warning sound.
The temperature can be seen on the lower left side of the display, the shown temperature is
approximate? In multi-camera mode the temperature display is not shown, and the tempera-
ture alarm is not active.
on the parent unit to open the menu. The image displayed on the parent unit will
Camera Sensitivity Feeding timer
Zoom Audio mute Language
/ keys to connect the camera to the desired lullaby. Then go to lullabies to
to select this option and use the
/ switch to turn the temperature on or off, change between °C and °F, or to set
Press the keys
menu function, then press the
that selected function.
After changing the setting, press the button
save the setting and the
/ to change the brightness settings of the screen.
/ in order to choose any of the following functions:
/ keys to choose what temperature you
/ / / to select the desired
button to open
button to exit the menu.
to
67