Manual Setup - Samsung DVD-HR773A User Manual

. Press the ▲▼ buttons to select auto Scanning, then press the OK or ▶ button.
The message "Your data will be lost. Press [OK] to continue, [RETURN] to exit." is displayed.
. Press the OK button, then press the ▲▼◀▶ buttons to select your Country.
The HDD & DVD RECORDER searches for the stations according to a preset preference list
~
corresponding to the country that you have selected. (See page 34)
. Press the OK button. Channel scan will be started.
The first frequency band is scanned and the first station found is displayed and stored. And the HDD &
~
DVD RECORDER searches for the second station and so on.
The number of stations automatically stored by the HDD & DVD RECORDER depends on the number
~
of stations that it has found.
M
`
Press the OK button to stop the Auto Scanning

Manual Setup

You can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to
remove. You can programme the order of channels.
To setup, follow steps 1 to 3 in "Auto Scanning" on page 36.
. Press the ▲▼ buttons to select Manual Setup, then press the OK
or ▶ button.
. Press the ▲▼ buttons to select a Pr (programme) you wish to
edit, delete, or swap, then press the COLOUr button.
Select Edit, Delete or Swap.
in case of Edit (rED(a) button) : You can add or edit PR
~
(programme) information. After change PR informations (CH.,
name, Decoder, MFT), select Save, then press the OK button.
- CH : Tune the channel using ◀▶ buttons.
- name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit name
by using ▲▼◀▶ buttons.
- Decoder : If you set on, you can record scrambled channels
using external decoder box.
Before setting on, refer to connecting external
decoder box in the page 24.
- MFT (Manual Frequency Tunning) : You can tune up the
channel frequency better using ◀▶ buttons.
in case of Delete (grEEn(B) button) : the channel information of selected PR(programme) will be
~
removed.
in case of Swap (YELLOW(C) button) : You can swap the channel information of two PR(programme).
~
For example, if you wish to swap PR2 and PR5, select swap at PR2, then press the OK button at PR5.
Manual Setup
PR CH Name Decoder
01 002 - - - - Off
02 004 - - - - Off
03 - - - - - - - - -
04 - - - - - - - - -
05 - - - - - - - - -
06 - - - - - - - - -
07 - - - - - - - - -
Edit Delete Swap
Manual Setup
PR 01
CH 002
Name - - - -
Decoder Off
MFT
Save
MOVE SELECT
m s
English _