Video Output - Samsung DVD-HR750 Instruction Manual

HDD & DVD RECORDER
HDD
TV Aspect : 4:3 Letter Box
Library
3D Noise Reduction : Off
Timer Record

Video Output

: Component
Component
Disc Manager
RGB
Setup
m MOVE s SELECT r RETURN e
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes No
Video Output
Video
You can enjoy high quality image through RGB or Component
|
|
video connections. RGB video output is available connecting
|
scart jack(AV1) and component video output is available
connecting component(Y, P
can be selected at one time.
EXIT
• Component
• RGB
In Component mode, you can set video output to Progressive
(P.SCAN) or Interlace, see pages 33 to 34.
Available video output jacks are as follow.
Available Video Output Jack
Setting mode
Output jack
Component Output
(Y, P , P )
B R
R, G, B
AV1
Scart
Composite
Composite Video out
S-Video out
Progressive scan
If your TV supports Progressive Scan, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
To view 'Progressive scan mode', fi rst connect the component
cable. (See page 20)
Be sure the Component cables are connected properly.
◆
Setting up the Progressive scan
1. With the unit in Stop mode, press the P.SCAN button on the front of
the HDD & DVD RECORDER.
The message "Press [Yes] to confi rm Progressive scan mode.
Otherwise, press [No]." will appear.
Press the ◄► buttons to select Yes, and then press the OK button.
2.
3. Set your TV to Progressive input (using the TV remote control.)
English - 33
, P ) jack. Only one of these signals
B R
Component mode
P.SCAN off mode (Interlace mode) P.SCAN on mode
(TV in progressive mode)
RGB Mode