Table of Contents
Advertisement
ENG
Plug & Play
Press ENTER to start
Plug & Play.
Start
Language
Ь А
Hrvatski
Netherland
Français
Move
Plug & Play
Antenna input check
Country
Belgium
Denmark
Germany
Move
Press ENTER to start
channel store.
Start
Enjoy viewing your new TV
Plug and Play Feature
Exit
English
Čeština
Enter
Austria
Croatia
Finland
France
Enter
ATM
P
-----
Exit
14
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1
If the television is in Standby mode, press the POWER button on
the remote control.
Result:
The Plug & Play is displayed.
2
To start the Plug & Play, press the ENTER button.
Result:
The Language menu is displayed.
3
Select the appropriate language by pressing the † or ... button.
Press the ENTER button to confirm your choice.
Result:
The message Antenna input check is displayed.
4
Make sure that the antenna is connected to the TV.
Result:
After a little while, the Country menu is displayed.
Select your country by pressing the L or M button. Press the
5
ENTER button to confirm your choice.
Result:
The ATM menu is displayed.
6
To start the channel store, press the ENTER button.
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and hialghest last).
➢
To stop the search before it has finished or return to normal
viewing, select the Exit and press the ENTER button.
7
When the setting has finished all, the message Enjoy viewing
your new TV is displayed, and then the channel which has been
stored will be activated.
Advertisement
Table of Contents
