Advertisement
5. When the USB 3.0 Data Link and KM Switch cable is connected properly the [Oti U3 Transfer Cable] will be shown under
Transfer Cable Class in the Windows Device Manager.
Congratulation! You have successfully installed the USB 3.0 Data Link and KM Switch cable.
Application Software Instructions
To begin set up, please click USB3 Smart Data Link Utility Icon
Note:
If there is one end connected to a USB 2.0 port of the 2 computers, the link icon will show as below figure. That means
the operation is working on USB 2.0 specification.
If there is one end failed to link, the SmartDataLink icon appears bottom right corner of taskbar will mark with an [x]
To retrieve link connection, you may remove & plug in both ends of the USB 3.0 Data Link and KM Switch cable. Or go to
My Computer and double-click the SMARTLINK icon (F:) and then click the executive archive "SmartDataLink.exe".
found in bottom right corner of taskbar.
Advertisement
