Advertisement
Quick Links
USB 3.0 Data Link and KM Switch Cable
Quick Installation Guide
The USB 3.0 Data Link and KM Switch cable enables access multiple computers and associated monitors by sharing a single
keyboard and mouse to switch between two computers. This product has the Data Link function allowing you to copy files
on your desktop between two computers. It allows you move files quickly over a USB 3.0 connection, and works with
Windows OS; to cut and paste them between computers.
Features
• KM function allows the user to control computers and associated
monitors; cut and paste text between two computers; share clipboards
• Perform File Transfer between two computers
• Drag-and-drop user-friendly interface
• Data Link function conforms to the Super Speed USB specification
• Switch mode:
Mouse movement
1.
Hotkey
2.
• USB BUS powered
• Compatible with Windows 7 / 8 / 8.1 / 10 or higher
Specifications
Model No.
Chipset
USB Data Speed (bps)
Data Transfer Rate
Compliant Version
Connector
LED Indicate
Power Mode
Operation Mode
Cable Length
Housing
System requirements:
Operating system: Windows 7 (32/64bit), 8.1 (32/64bit), 10 (32/64bit) or later.
You can also use the USB 3.0 Data Link and KM Switch cable with the provided software to transfer
files from one computer to another computer, and control the file directories on both computers at
the same time. The software supports file transfer between supported operating systems, including
Windows 7, 8.1 and 10 or later
GM-PCLINK3
OT7300
5G / 480M / 12M / 1.5M
5Gbps
USB 3.0 /2.0 / 1.1
USB Type A Male x 2
4 ( Green )
Bus Powered
Peer to Peer
1.5m
Plastic
Advertisement
Summary of Contents for GearMo GM-PCLINK3
- Page 1 Mouse movement Hotkey • USB BUS powered • Compatible with Windows 7 / 8 / 8.1 / 10 or higher Specifications Model No. GM-PCLINK3 Chipset OT7300 USB Data Speed (bps) 5G / 480M / 12M / 1.5M Data Transfer Rate...
-
Page 2: Installation
Installation Starting Windows 1. Connect one end of the USB 3.0 Data Link and KM Switch cable to a standard USB port on one of the two computers. And connect the other end of the USB 3.0 Data Link and KM Switch cable to a USB port on the second computer. 2. - Page 3 5. When the USB 3.0 Data Link and KM Switch cable is connected properly the [Oti U3 Transfer Cable] will be shown under Transfer Cable Class in the Windows Device Manager. Congratulation! You have successfully installed the USB 3.0 Data Link and KM Switch cable. Application Software Instructions To begin set up, please click USB3 Smart Data Link Utility Icon found in bottom right corner of taskbar.
- Page 4 Setup and select Preferences Move the mouse cursor to bottom right corner of taskbar, right click the SmartDataLink icon for further settings. 1. KM Sharing Select [Turn Off] to disable the Keyboard and Mouse Control Switching Settings Use Mouse to Move Off the Edge of Screen: Select [Use mouse move off the edge of screen] to simply move the mouse off the edge of screen.
-
Page 5: Clipboard Sharing
2. Clipboard sharing Open a file and select the content (text/pictures) you want from the first computer, right click and select “Copy”. Move the cursor to the location of the 2nd computer to place the Content (text/pictures), and right click and select “Paste”... -
Page 6: Regulatory Compliance
Regulatory Compliance Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.